OmniCast™ Cement is more than just cement. It is an ultra-high-performance concrete system specially developed for creators, designers, and small-scale manufacturers who pursue exceptional detail. Breaking beyond the limits of traditional materials, it gives concrete a refined, smooth touch and structural strength that surpasses stone.

Professional-Grade Performance

1. Exceptional Detail Reproduction
Omnicast™ Cement delivers remarkable mold replication performance, capturing even the finest textures and intricate patterns with virtually no detail loss.

2. Rich Color Performance
Its high-purity base formula is specially optimized for color blending. It is compatible with both water-based pigments and iron oxide color powders, helping maintain rich, long-lasting color saturation.

3. Excellent Flowability for Smooth Casting
With its unique self-compacting properties, the mixed slurry achieves excellent flowability and can automatically fill hard-to-reach corners of the mold for a smoother, more complete casting process.

4. Fast Curing for Efficient Production
Omnicast™ Cement cures in 2 hours and can be demolded in 4 hours, allowing you to produce finished pieces quickly while maintaining high quality.

5. Eco-Friendly and Non-Toxic
Made with a clean, formaldehyde-free formula and no irritating odor, it is suitable for home studios and indoor decorative applications.

6. Built for All Environments, Strong and Durable
With compressive strength far beyond conventional concrete, Omnicast™ Cement performs reliably in cold, humid, and high-temperature environments, making it suitable for a wide range of applications.

Technical Specifications

Mixing Ratio (Powder : Water): 100 : 15
Compressive Strength: 120 MPa+
Working Time (at 25°C / 77°F): 20–30 minutes
Demolding Time: Cures in 2 hours, demold in 4 hours (depending on ambient temperature)
Safety Rating: Eco-Friendly / Non-Toxic

Storage:
Store sealed, dry, and protected from light. Avoid moisture absorption and clumping. Recommended storage temperature: 5–35°C (41–95°F). Use as soon as possible after opening. Reseal any unused material tightly for storage.

Application Guide

To ensure the powder and water mix evenly without clumping at the ultra-low water ratio of 15%, it is recommended to use an electric mixing tool and mix continuously for 1–3 minutes until the slurry becomes smooth, uniform, and free of particles. Do not add water again after mixing.

During application, it is recommended to wear protective gloves and safety goggles, and avoid inhaling dust. In case of skin contact, rinse thoroughly with clean water.

Residual wastewater from cleaning mixing containers and tools must not be poured directly into drains, as it may cause blockage. Allow the solids in the wastewater to settle before collecting and disposing of it properly.