Silicone moulds have gracefully etched their place in the realms of baking and crafting, offering a world of creative possibilities with their flexibility and versatility. However, as these trusty companions accompany you on your crafting journey, it's crucial to understand how to keep them in pristine condition. Cleaning silicone moulds is a key step in ensuring their longevity and quality. In this article, we’ll delve into effective methods for cleaning and maintaining your silicone moulds, as well as tips to ensure their longevity.

Essential Equipment for Mould Care

Before we dive into the details, let's ensure you have the necessary tools at your disposal:

Baby wipes: Ideal for wiping moulds and equipment.
Sticky tape: Perfect for removing dirt or dust.
Sponge: For gentle cleaning.
Cotton buds: Useful for reaching tight spots.
Ziplock bags: To keep moulds clean and dust-free.
Washing up bowl: For soaking.
Mild soap: Essential for cleaning.
Mask: For safety when using mould release (follow manufacturer's instructions).
When Using Your Moulds

Preparation: Begin by using sticky tape inside your moulds to eliminate any dirt or dust that may have found its way in.

Mould Release: Apply mould release before each use to extend your moulds' lifespan. Remember to follow the manufacturer's instructions and consider wearing a mask.

Handling with Care: Be cautious when using items like toothpicks, as they can potentially scratch or mark your mould. Excessive heat from a gas torch can also lead to your resin pieces sticking to the mould, resulting in damage during removal.

Mould Removal: When taking pieces out of the mould, handle them gently and avoid overstretching the mould.

Cleaning Your Moulds

Removing Residue: Utilize sticky tape to remove old cured resin bits or glitter from your moulds.

Baby Wipes: Baby wipes are incredibly useful for wiping your moulds and equipment. Avoid using alcohol, as it can remove the shine.

Gentle Soak: Place your moulds in a bowl of warm, mild soapy water for a brief soak. It's essential to do this in a separate bowl rather than the sink, and refrain from using hot water or putting them in a dishwasher.

Cleaning Method: You can use the soft side of a sponge, but many prefer using a baby wipe due to their strength and mold-friendly nature. Be gentle during cleaning to avoid damaging the mould or removing its shine.

Drying: Allow your moulds to dry thoroughly, ideally upside down or with a gentle dab using kitchen roll. Do not rub vigorously with kitchen roll, as this could harm your mould's surface.

Storing Your Silicone Moulds

Complete Drying: Ensure your moulds are completely dry before storing them. Use cotton buds to reach and dry challenging spots, avoiding any rubbing.

Storage Environment: Store your moulds in a cool area away from direct sunlight.

Flat Storage: Keep your moulds flat and avoid stacking them, as reshaping a misshapen mould is nearly impossible.

Ziplock Bags: Consider placing your moulds in ziplock bags to keep them clean and dust-free.

Rescue Missions: Getting Pieces Out of the Mould

If your piece gets stuck in the mould:

Ensure Full Cure: Make sure your piece is fully cured. If it's curing in a cold room, consider moving it to a warmer spot to speed up the process.

Freezer Trick: If it's fully cured but still stuck, try placing it in the freezer for about an hour before attempting removal. Freezing won't harm your mould.

Warm Soapy Water: If freezing doesn't work, immerse it in warm soapy water to facilitate release. Ensure water reaches the gaps between the mould and piece.

Last Resort: If all else fails, carefully wedge a non-sharp item between the mould and piece. Be cautious, as this can potentially mark either the mould or piece.

We hope these tips assist you in maintaining your moulds and reducing the need for replacements in the future. Keeping your silicone moulds clean and in good condition ensures that they remain your trusty companions throughout your creative endeavors.

September 14, 2023 — SY S

Leave a comment